Oscilloscope Jobs

Mission Driven

Social Impact Driven

Passion for Exploration

Reward & Recognition

SpaceX is hiring an EMC/EMI Test Technician to execute emission and immunity testing, fabricate test fixtures and harnesses, and support avionics verification across its launch and spacecraft programs.

Senior Electronics Test Engineer I needed to architect and execute board- and system-level test plans and automation for cutting-edge satellite and aerospace communications hardware.

CesiumAstro is hiring an RF Test Engineer II in Austin to develop and execute RF test plans and validation for satellite and airborne communication hardware.

Vector Atomic is hiring an Associate Electrical Engineer to design and validate ultra-low-noise analog and mixed-signal electronics for quantum navigation and timing instruments.

Join SEL in Pullman as a Software Engineering Technician I to execute firmware/software tests, create test plans and scripts, and support engineering teams within an employee-owned manufacturing environment.

Experienced Site Engineer needed to lead maintenance and technical support for Hitachi's Proton Beam Therapy systems at MD Anderson in Houston, ensuring safe, reliable operation and excellent customer service.

Experienced electrical engineer needed to lead mixed-signal PCBA design and PCB layout for cutting-edge quantum instruments at Vector Atomic.

Skyloom (an IonQ company) is hiring a hands-on Electrical Engineer to test and validate PCBAs and multi-board electronic subsystems for space-grade optical communications in Broomfield, CO.

InterImage seeks a Systems Engineer I to apply systems engineering across lifecycle phases, lead RF/EMI test efforts, produce formal test reports, and coordinate technical activities with government stakeholders.

Application Engineering Intern at Renesas Hi-Rel to perform lab-based evaluations of power/ADC products, produce technical analysis, and present findings.

Shield AI seeks a hands-on Senior Electronics Lab Technician to support prototype avionics builds, lab infrastructure, and testing for next-generation X-BAT systems in Dallas.

Lead and contribute to hardware product design and development at Alertus, guiding a small engineering team to deliver reliable life-safety systems for production.

Mission Driven

Social Impact Driven

Passion for Exploration

Reward & Recognition

Contribute to national-security satellite programs by designing and automating avionics test systems and ensuring flight hardware reliability at SpaceX’s Starshield team in Hawthorne, CA.

Array Labs is hiring a Senior Electrical Design Engineer to lead the design and validation of high-speed mixed-signal electronics for next-generation radar satellites.

Contribute to development and execution of electrical verification and automated test systems for rugged autonomous maritime platforms at a fast-paced hardware company.

An in-person R&D internship at Kestra Medical Technologies focused on hands-on research and characterization of wireless charging for wearable cardiac devices.

Lead and grow the Atlanta avionics team to deliver flight-critical embedded electronics and LRUs from concept through production for Anduril's UAVs and propulsion systems.

Experienced electrical engineer needed to lead R&D for biometric wearables at WHOOP, combining circuit design, hands-on prototyping, and advanced data-driven validation to shape next-generation products.

Range Energy seeks an early-career Firmware & Embedded Software Engineer to develop firmware, embedded Linux tools, and field-facing diagnostic software for its powered trailer platform.

Lead electrical validation and ATE development for rugged autonomous maritime systems, driving test strategy, automation, and cross-functional verification.

Lead technical development and program execution for mobile mNAND products at Micron’s Boise site, driving design, debug, and qualification from concept to production.

Elemental LED is hiring a Quality Engineer to lead QA, inspection, testing, and continuous improvement activities for its LED lighting products at the Reno manufacturing site.

Mission Driven

Social Impact Driven

Passion for Exploration

Reward & Recognition

SpaceX seeks a hands-on Hardware Test Engineer in Redmond to design, build, and automate test and support equipment for Starlink battery and power systems.

Paid summer internship for an engineering student to assist with hardware bring-up, lab testing, and test automation for high-performance electrical systems.

CesiumAstro is hiring a Senior Power Electronics Engineer to lead design, verification and integration of spacecraft power systems from concept through production.

ALSO is hiring a Sr. Staff Electrical Engineer to own high-speed PCB architecture, SI/PI and EMI/EMC for next-generation micro-mobility platforms.

Lead design and validation of BMS, PCB, and sensor electronics for autonomous vehicles at Anduril Industries in Costa Mesa.

Fermilab is hiring a High-Level RF Engineer to design, operate, and maintain high-power RF systems (klystrons, tetrodes, IOTs, solid-state amplifiers) that support linac and synchrotron performance for the PIP-II and existing accelerator programs.

Lead Test Technician at Fuse responsible for scheduling and executing production test activities, troubleshooting complex system failures, and evolving test processes for tactical communications products.

Experienced in semiconductor test and eager to solve device-level problems, you will support silicon debug, failure analysis, and ATE-based testing at Eurofins EAG's Santa Clara lab.

Entry-level Electrical Engineer (PCB Design) to support schematic capture, multilayer PCB layout, bring-up, and validation for reactor control systems at Radiant’s El Segundo HQ.

Experienced V&V engineer needed to lead verification and validation efforts for software-enabled medical devices, ensuring regulatory compliance and product quality across cross-functional teams.

Lead post-silicon validation for Marvell’s next-generation data center SoCs and subsystems—owning test plans, lab characterization, and cross-team debug through production.

Commonwealth Fusion Systems is hiring an R&D Measurement & Automation Engineer to develop and deploy DAQ, control hardware/software, and instrumentation for magnet testing and R&D.

Validate and characterize next-generation mixed-signal preamp chips at Western Digital using RF test gear, automation scripting, and hands-on board-level debugging as part of an early-career development program.

CesiumAstro is hiring a Principal Wire Harness Design Engineer II to lead the design, validation, and production planning of complex power, digital, analog, and RF interconnect systems for space and airborne platforms.

Be the primary owner of product validation at Arable—driving design verification, automated test fixtures, and reliability testing to ensure prototypes survive real-world conditions while using AI tools to accelerate workflows.

Dexmate is hiring a hands-on Hardware Support Engineer to perform bench-level failure analysis, system debugging, and customer-facing support for its humanoid robot platform.

Torc, a leader in autonomous trucking and part of the Daimler family, is looking for a Hardware Engineer II to develop and validate automotive hardware components with a focus on safety, signal integrity, and requirements traceability.

Lead application engineering efforts for Renesas' high-reliability analog portfolio in support of space and mission-critical customers, focusing on device characterization, documentation, and customer enablement.

An experienced electrical engineer to lead hands-on continuous improvement efforts for WHOOP's high-volume wearable hardware, improving reliability, yield, and manufacturability.

Pivotal seeks an Electrical Engineering intern to support schematic design, PCB layout, hardware bring-up, and testing at our Palo Alto HQ.

Shield AI is hiring a Staff Engineering Specialist in Dallas to build, maintain, and operate hardware test systems (including HIL and production test) for avionics and electromechanical subsystems.

Experienced electrical engineer needed to lead PCB and system-level electrical design for production endoscopes in a cross-functional medical robotics team.

Bosch is hiring a Summer 2026 Engineering Intern to assist with electronic hardware design, prototyping, and vehicle testing for brake control units.

WHOOP seeks a Senior Electrical Engineer to design and deliver miniaturized, low-power mixed-signal hardware and lead NPI efforts for high-volume wearable products.

Design and validate custom power electronics for Mainspring’s Linear Generator, collaborating across test, production, and reliability teams in a hybrid Menlo Park role.

Contribute to firmware development for advanced 5G wireless systems at JMA by designing, debugging, and integrating embedded software across hardware and FPGA platforms.