Controls Engineer Jobs

Mainspring Energy seeks a Staff Controls & Automation Engineer to lead design and deployment of scalable control systems and automation for its manufacturing operations.

Entry-level automation engineer role supporting BMS/EPMS integrations, PLC/HMI programming, and IT/OT network tasks across projects in Gambrills, MD or Ann Arbor, MI.

JLL is hiring an Automation Engineer in Somerset, NJ to lead control system design, troubleshooting, and optimization for material handling equipment and warehouse automation.

Bosch is hiring a Senior Controls Engineer with strong CoDeSys and industrial automation experience to lead control system design and commissioning for production equipment at our Charleston facility.

Crusoe is hiring a Staff Instrumentation & Controls Engineer to lead the field deployment, integration, and commissioning of BMS/EPMS/SCADA systems for its hyperscale data center in Childress.

Becton, Dickinson and Company seeks a Staff Mechanical Engineer to lead complex equipment and automation projects that commercialize and support high-volume medical device manufacturing.

Crusoe is hiring a Staff Commissioning Engineer (Mechanical) to lead and execute mechanical commissioning across Abilene data center builds, managing third-party Cx agents, factory testing, and turnover to operations.

Lead the electrical reliability, protection, and maintenance strategy at Air Products' Texas City plant, supporting high-voltage systems and rotating machinery across North America.

Experienced electrical/process controls engineer needed to maintain and improve PLC/HMI systems and electrical infrastructure at IFF's Memphis Protein Solutions plant.

PROCEPT BioRobotics seeks a Senior Quality Engineer to drive design controls, risk management, and V&V for disposables and accessories while ensuring compliance with FDA QSR, ISO 13485, and EU MDR.

Experienced Controls Design Engineer to lead BMS/controls design for data center projects at Olsson, working remotely with occasional site travel.

Contribute to state-of-the-art robot learning and on-robot deployment at a fast-moving consumer robotics startup focused on dexterous home manipulation.

AECOM is hiring a Protection and Controls Engineer to perform protection design, relay coordination, and commissioning support for power delivery projects while working remotely (U.S.-based) with periodic travel.

Albireo Energy seeks a hands-on Jr. Project Engineer to coordinate BAS engineering, field execution, and commissioning for construction and renovation projects in the Gambrills, MD area.

Bosch is hiring a Controls Engineer to troubleshoot, program, and optimize PLC, robot, and vision systems at its Florence, KY manufacturing facility.

Loram seeks an entry-level Electrical Engineer to design, integrate, and validate electromechanical and control systems for rail maintenance equipment based in Hamel, MN (or Georgetown, TX).

Experienced electrical/control engineer needed to design and deliver automation systems for water and wastewater projects while mentoring teams and ensuring engineering excellence.

Stryker’s Inari Medical is hiring a Senior R&D Engineer to lead development, V&V, and product launch activities for peripheral vascular devices at the Irvine, CA engineering site.

Wabtec is hiring a Design Engineer in Oak Creek, WI to create and refine Maintenance of Way equipment through hands-on CAD design, analysis, and field support.

Mission Driven

Social Impact Driven

Passion for Exploration

Reward & Recognition

SpaceX is seeking a Senior Automation Engineer to architect and commission advanced PLC/SCADA and manufacturing data systems for its Blades & Vanes investment casting foundry to improve uptime, quality, and process optimization.

Build and ship real-time, safety-focused software for a life-saving cardiac robotics platform while working hybrid from Santa Cruz.

Design and oversee control system hardware development and supplier-delivered components for Rolls‑Royce engine programs, ensuring compliance with technical, test and program requirements.

Mainspring Energy is hiring an R&D Test Engineer to lead instrumentation, data acquisition, and signal-processing driven experiments on its Linear Generator at the Menlo Park HQ.

Saronic Technologies is hiring a Controls Systems Engineer to design, implement, and commission PLC/DCS/SCADA control systems for autonomous maritime platforms while ensuring compliance with safety standards.

Experienced Instrumentation & Controls Engineer needed to lead I&C deliverables, design control and safety systems, and support commissioning for process-industry projects at AFRY.

Lead system-level design and delivery for TRS autonomy products—driving architecture, prototyping, test, and production for expeditionary autonomous systems at Anduril's Costa Mesa headquarters.

Lead quality strategy and design-control activities for next-generation robotic-assisted surgical products at a market-leading medical device company.

Lead systems-level architecture and program execution for advanced oximetry and wearable monitoring products at Medtronic’s Lafayette, CO site, spanning custom silicon, embedded firmware, signal processing, and device software.

Valmet is hiring a Field Service Engineer to maintain, troubleshoot, and support process analyzers at customer sites across the Atlanta area, ensuring peak equipment performance and strong customer relationships.

Crusoe is hiring a Commissioning Engineer, Mechanical in Amarillo to lead mechanical commissioning for data center projects and ensure optimal uptime and performance of critical infrastructure.

Medtronic is seeking a Product Engineer II to own design support and continuous improvement for wound management devices in high-volume production, focusing on yield, root cause analysis, supplier changes, and device quality.

Rolls-Royce seeks a Supplier Engineered Equipment Design Engineer in Indianapolis to lead controls hardware requirements, supplier design oversight, and validation across the program lifecycle.

AECOM Hunt is hiring a Construction Project Engineer in Indianapolis to support construction administration, schedule and cost controls, and field coordination on large infrastructure and commercial projects.

Anduril is seeking a Senior Controls Engineer to lead night-shift controls engineering, commissioning, and troubleshooting for automated production systems at its Costa Mesa manufacturing facility.

AECOM is hiring a licensed Protection and Controls P.E. to lead substation protection, relay settings, and power system studies for grid modernization projects in a remote U.S. role.

Customer-Centric

Rapid Growth

Diversity of Opinions

Reward & Recognition

Friends Outside of Work

Inclusive & Diverse

Empathetic

Feedback Forward

Work/Life Harmony

Casual Dress Code

Startup Mindset

Collaboration over Competition

Fast-Paced

Growth & Learning

Open Door Policy

Rise from Within

Maternity Leave

Paternity Leave

Flex-Friendly

Family Coverage (Insurance)

Medical Insurance

Dental Insurance

Vision Insurance

Mental Health Resources

Life insurance

Disability Insurance

Health Savings Account (HSA)

Flexible Spending Account (FSA)

401K Matching

Paid Holidays

Paid Sick Days

Paid Time-Off

Lurie Children’s seeks a senior Vulnerability Management Technical Lead to drive remediation, cloud/infrastructure hardening, and cross-functional security initiatives across the enterprise.

Experienced Mechanical Engineer needed to lead HVAC design and project deliverables for AECOM’s Buildings + Places projects in Orange, CA.

AeroVironment seeks an experienced Systems Engineer III to lead systems design, modeling, requirements allocation, and flight-test validation for advanced unmanned systems.

Fortune Brands seeks a Director of Distribution Engineering to lead DC engineering, facilities management and automation initiatives that improve reliability, safety and operational performance.

Medtronic is hiring a Reliability Engineer II in Mounds View, MN to support post‑market surveillance, risk assessment, and reliability improvement for cardiac surgery products.

An entry-level, customer-facing development role that combines sales training and technical field experience to prepare recent engineering graduates for sales engineer and commercial roles within the UFT platform.

Experienced automation engineer needed to develop and maintain PLC and HMI solutions for Charm Industrial's industrial carbon-removal processes in Fort Lupton, CO.

Daniels Health is hiring a hands‑on Controls Engineer to develop PLC controls, commission industrial robots, and implement machine vision for advanced medical waste processing systems.

The DEP is hiring an Assistant Environmental Engineer to act as an Assistant Project Manager supporting wastewater capital projects in Queens, overseeing contract documents, design and construction coordination, EH&S integration, and stakeholder communication.

AECOM is hiring an Electrical Engineering Discipline Lead in Denver to lead electrical and I&C design for mining projects, mentor engineers, and serve as a primary technical client contact.

AECOM is seeking a Senior Technical Lead in Chicago to provide technical oversight and hands-on design for microgrid, BESS, and renewable energy projects in a hybrid role.

Experienced electrical engineer needed in Tucson to perform electrical design, calculations, vendor evaluations, and project support for mining and industrial projects at AECOM.

Become AECOM’s remote Data Center Control System Designer, designing BAS/PLC/SCADA and OT network solutions for complex colocation and hyperscale data center projects.